Fuel Cell System Components
Fuel Cell Hydrogen Concentration Sensor OHS1-01 MEMS Catalytic Combustion Fast Response Anti-Poison
Hydrogen concentration sensor OHS1-01 for fuel cell vehicles and storage systems, MEMS catalytic combustion, T90 <2s, 500mW, anti-poisoning.
Fuel Cell Medium Pressure Hydrogen Sensor HK2013P09 0-20bar High Accuracy 1.5% Automotive Grade
Medium-pressure hydrogen pressure sensor HK2013P09 for PEMFC 5-300kW, 0-20bar range, 1.5% accuracy, <=2ms response, IP67.
Fuel Cell Heated Drain Valve YJDV3122601 5-300kW PTC Ceramic Heating IP68 Diaphragm Isolation
Heated drain valve YJDV3122601 series for PEMFC 5-300kW, integrated PTC ceramic heating, fast low-temperature ice breaking, IP68.
Fuel Cell Medium Pressure Hydrogen Solenoid Valve HSQLDCF 5-300kW Pilot Type Under 25bar IP67
Medium-pressure hydrogen solenoid valve HSQLDCF series for PEMFC 5-300kW, pilot type, response <=10ms, max pressure <=25bar, IP67.
Fuel Cell Anode Water Separator HWS Series 0-200kW Separation Efficiency Above 95% Low Flow Resistance
Anode water separator HWS series for PEMFC 0-200kW, centrifugal separation, efficiency >=95%, low flow resistance, integrated heated drain.
Fuel Cell Metal Hydride Solid-State Hydrogen Storage Cylinder QQ-TMC 20-110g Ambient Low Pressure
Metal hydride solid-state hydrogen storage cylinder QQ-TMC series, 20-110g capacity, ambient low-pressure storage, intrinsically safe, plug and play.
Fuel Cell High Pressure Hydrogen Storage Cylinder Type III IV 35 70MPa Carbon Fiber Fully Wrapped
High-pressure on-board hydrogen storage cylinders Type III and Type IV for fuel cell vehicles, 35/70MPa, carbon fiber fully wrapped.
Fuel Cell Hydrogen Injector HGI S1.3 5-300kW Precise Flow Control 10 Million Cycle Life
Hydrogen injector HGI S1.3 proportional valve for PEMFC 5-300kW, precise flow control by current/PWM, 10 million cycle life, IP67.
Fuel Cell Hydrogen Circulation Pump WDE-C008-H 60-120kW Long Life Bearing -40C Ice Breaking Start
Hydrogen circulation pump WDE-C008-H for 60-120kW fuel cell systems, water-vapor-resistant long-life bearing, -40C ice-breaking start, IP67.
Fuel Cell Hydrogen Post-Treatment Module LN Series 5-300kW Ejector Recirculation Water Separation
Hydrogen post-treatment module LN series for PEMFC 5-300kW, integrated ejector recirculation and water separation, zero parasitic power, automotive grade.
Fuel Cell Hydrogen Pre-Treatment Module LN Series 5-300kW Pressure Control Ejector Recirculation
Hydrogen pre-treatment module LN series for PEMFC 5-300kW, integrated supply pressure regulation and ejector hydrogen recirculation, automotive grade.
Fuel Cell Brazed Plate Hydrogen Heat Exchanger K Series 0-200kW Customizable Ports
Standard brazed plate hydrogen heat exchanger K series for PEMFC hydrogen preheating 0-200kW, high efficiency, customizable ports.
Fuel Cell High Pressure Hydrogen Filter 0-200kW 50um Filtration 99.5% Efficiency SUS316
High-pressure hydrogen filter for fuel cell systems 0-200kW, >50um filtration, 99.5% efficiency, SUS316 housing, replaceable element.
Fuel Cell System Plastic Vacuum Check Valve CHPW KL Series Anti Backflow Low Cost Engineering Plastic
Plastic vacuum check valve for fuel cell air lines, prevents hot humid exhaust backflow into the PACK, opening pressure below 2kPa, low cost.
Fuel Cell System Cathode Water Separator WaterPro Series 30-200kW Separation Efficiency Above 85%
Cathode water separator for PEMFC systems 30-200kW, inertial separation, efficiency >=85%, protects the expander and recovers exhaust energy.
Fuel Cell System Exhaust Muffler 30-300kW Insertion Loss Over 21dB Low Back Pressure Design
Exhaust muffler for PEMFC tailpipe systems 30-300kW, insertion loss over 21dB, wide-band silencing and low back pressure.
Fuel Cell System Smart Air Three-Way Valve SV Series Replace Back Pressure and Bypass Valve
Smart air three-way valve for PEMFC air systems 0-100kW, one valve replaces back pressure and bypass valve, improving integration and lowering cost.
Fuel Cell System Smart Electronic Throttle Valve T Series 0-200kW CAN PWM Dual Eccentric Butterfly
Smart electronic throttle valve for PEMFC air systems 0-200kW, dual eccentric butterfly structure, CAN/PWM control, IP67 sealed.
Fuel Cell System Hollow Fiber Membrane Humidifier GZS Series 5-200kW High Efficiency Low Pressure Drop
Hollow fiber membrane gas humidifier for PEMFC systems 5-200kW, high humidification efficiency, low pressure drop, integrated intercooler option.
Fuel Cell System Water-Cooled Intercooler ZLQ Series 5-200kW High Efficiency Low Flow Resistance
Water-cooled intercooler for PEMFC systems 5-200kW, high heat exchange efficiency, low flow resistance and insulated mounting.
Fuel Cell System Adjustable Speed Brushless Blower WB Series 10kW 0-100% Stepless Speed Control
Adjustable speed brushless blower for small PEMFC systems up to 10kW, 0-100% stepless speed control, no external inverter or water cooling required.
Fuel Cell Super High Speed Air-Bearing Centrifugal Air Compressor HEC VSEC 5-300kW 120000rpm
Super high speed air-bearing centrifugal air compressor for PEMFC systems, HEC and VSEC series, 5-300kW, up to 120,000rpm, 30% energy recovery.
Fuel Cell System Hot-Film Air Mass Meter HFM7 0-970kg/h High Precision Digital Output
Dedicated hot-film air mass meter for fuel cell and engine intake measurement, 0-970 kg/h, digital output, under 15ms response.
Fuel Cell Engine Cathode Air Filter 0-200kW System High-Efficiency SO2 NOx NH3 Removal Filtration
Dedicated cathode air filter for PEMFC fuel cell engines, compatible with 0-200kW systems, removing SO2, NOx, NH3 and particulate matter.
